News on Running and Completed R&D Projects

By launching the final conference of the MARTINA project, TECOS together with the project partners completed the three-year research and development period, which brought over 120 innovations in the field of advanced materials. MARTINA - MAteRials and Technologies for New Applications was recognized as one of the most prominent Slovenian business-technological model of cooperation, vital in the contribution of new knowledge in the field of material science and successful practice example of the efficacious cooperation between the industry and knowledge institutions.

TECOS Slovenian Tool and Die Development Centre hosted the kick-off meeting as one of the partners in the INTERREG: S3HubsinCE project. The two-day meeting was dedicated to aligning the various contents and developing a common understanding of the project’s objectives as well as to socialising, networking and deciding on the future steps.

Central Europe has a high potential of transnational cooperation opportunities to promote the bottom-up implementation of RIS3 strategies, however most of these opportunities remain unexploited.

An European project will valorise post-consumer plastic waste and newsprint paper for new construction, packaging and automotive parts.

There is no translation available.

Partnerji mednarodnega projekta ECOSIGN, ki ga koordinira Razvojni center orodjarstva Slovenije TECOS, smo na 5. projektnem sestanku sprejeli datum začetka izvajanja pilotne izvedbe usposabljanj štirih modulov za študente in delavce. Usposabljanje bo potekalo od marca do junija 2018, sestanka pa so se poleg projektnih partnerjev udeležili tudi predstavniki Izvajalske agencije za izobraževanje, avdiovizualno področje in kulturo pri Evropski komisiji (EACEA), ki spremlja projekt.

There is no translation available.

Predstavniki partnerjev projekta KOR - Javnega štipendijskega, razvojnega, invalidskega in preživninskega sklada, podjetja Kompetenca in  Razvojnega centra orodjarstva Slovenije TECOS so na skupnem srečanju uskladili tekoča vprašanja izvajanja projekta in začrtali nadaljnje korake za krepitev kompetenc zaposlenih v panožnih podjetij na področju orodjarstva.

There is no translation available.

Strateško razvojno-inovacijsko partnerstvo za Tovarne prihodnosti (SRIP ToP) vključuje orodjarstvo kot eno strateških  panog slovenskega gospodarstva. Aktivno sooblikovanje razvoja panoge in za njen razvoj potrebnih kadrov sta bila poglavitna razloga za udeležbo na delavnici z naslovom Kompetence zaposlenih za tovarne prihodnosti.  

On July 20th 2017, Citruspack project has been launched at Aitiip Technology Centre headquarters, located in Zaragoza (Spain).

The project aims to demonstrate that sustainability and efficiency can be applied to agricultural and industrial practices by researching and boosting the potential of byproducts through their valorisation in a number of new value chains.

There is no translation available.

Čas za pripravo razvojnih projektov za oddajo na Javni razpis za »Spodbude za raziskovalno razvojne projekte 2« se hitro izteka, saj je oddaja na prvi rok prve oddaje že 26. septembra 2017. Če iščete podporo pri konsolidacije razvojnih idej, izvajanju razvojnih aktivnosti in pomoč pri pripravi projektnih predlogov, smo v TECOS-u pravi naslov.

Ministrstvo za gospodarski razvoj in tehnologijo je objavilo dva aktualna javna razpisa za spodbujanje razvojno-raziskovalno naravnane projekte.

Between 14. and 15. of March 2017 at the Headquarters of Technological Center AITIIP in Spanish Zaragoza the 2nd working meeting of the consortium of project partners from Spain, Slovenia and Sweden was held for the European project BAQUA LIFE.

    MG 9995

TECOS, Slovenian Tool and Die Development Centre started a Strategic Partnership with the leading organisation - AITIIP Technology Centre (Spain) and other reputable partners such as Fraunhofer (Germany), UNIPI (Italy) and Tecnopackaging (Spain), within the European ERASMUS+ project BIOPLASTICTRAIN (New training contents for plastic transformation technicians about bioplastics and biopolymers). Project officially started with the 1st of November 2016 and will be continued for another two years. The introductory kick-off meeting was organised by the Coordinator AITIIP in Zaragoza, Spain from 8th until 9th of November 2016.

Bioplastictrain

TECOS Slovenian Tool and Die Development Centre started the cooperation with AMBI-Metalpast d.o.o. (AMBI) on the European three-years long LIFE + project LIFE BAQUA (Solutions through the new use for a waste of banana crop to develop products and Aquaculture and plastics sector), which officially began in July 2016. The introductory kick-off meeting was organised by Coordinator University of Las Palmas de Gran Canaria in Las Palmas from 14.th until 15.th of September 2016.

There is no translation available.

Razvojni center orodjarstva Slovenije TECOS, Center RS za poklicno izobraževanje in Fakulteta za elektrotehniko, računalništvo in informatiko Univerze v Mariboru sodelujemo pri evropskem projektu, namenjenem oblikovalcem prehrambne embalaže, elektronskih izdelkov in tekstila. 

Page 1 of 2

Why choose TECOS?

  • Vast Experience
  • Highly Trained Staff
  • Short Response Time
  • One Contact For All Your Problems
  • State-of-the-art Equipment

Sample Project

Quickly to precise 3D model of a mill for manufacturing of replacement parts

Quickly to precise 3D model of a mill for manufacturing of replacement parts

The client had to renew a wore down rotor with knife segments for which they didn't have any documentation. With precise 3D scanning of the original and creation of functional CAD model we provided them with data for production of replacement.

Thermoplastic oil filter housing warpage prediction due to injection moulding

Thermoplastic oil filter housing warpage prediction due to injection moulding

The customer has presumed problems with excessive warpage in the stage of tool design. The material is PA66 with 30% of glass fibers. With the help of advanced injection moulding analysis we predicted the trend and values of warpage and thus successfully eliminated the problems.

Analysis of Deep Drawing Process

Analysis of Deep Drawing Process

Our client has planned a single phase deep drawing process for the presented case, however several doubts about manufacturability arose. The conducted analysis has cleared all doubts.

With Autodesk Advanced Material Exchange and Abaqus to precise results of structural FEM for fiber reinforced materials

With Autodesk Advanced Material Exchange and Abaqus to precise results of structural FEM for fiber reinforced materials

We made a comparative study between experimentaly and numerically determined strength of a fibre reinforced product, which yielded extremely good match of the results from both methods.

Prijava eseznam Tecos